Shibaura CM374 Operator's Manual download pdf (Page 28)

AUTOMATIC OR PERMANENT FOUR-

WHEEL DRIVE (FWD)

The lever is used to select automatic Four-

Wheel Drive or permanent Four-Wheel Drive.

Four Wheel Drive (FWD) Selector Lever is

activated by the same lever as the one that

activates the Range Selector Lever.

When the lever is located in the position of

Range Selector Lever, the tractor will run in

Automatic FWD mode.

When the lever is brought to the outer slot, the

tractor will run in Permanent FWD mode and

low range.

When in motion, always bring the unit to a

complete stop before moving the selector lever.

Automatic Four-Wheel Drive (FWD) means that

the four-wheel drive line is engaged

automatically when the front wheels start to slip,

but, in normal mowing, reverts to 2WD, this

provides sharp and smooth turn without

damaging turf.

Permanent Four-Wheel Drive should be used

when additional traction is required while

operating in loose soil, wet, slippery conditions

or slopes.

The steering (rear) axle will not drive in reverse

when mower is operating in Automatic FWD.

POWER TAKE-OFF OPERATION

The power take-off (PTO) transfers engine

power directly to the PTO equipment.

PTO is controlled through the PTO lever A. To

engage the PTO, push the lever forward. To

disengage the PTO, pull the lever rearward.

WARNING! TO AVOID PERSONAL INJURY,

KEEP CHILDREN AND OTHERS AWAY

WHEN OPERATING PTO EQUIPMENT.

NOTE: The PTO lever must be placed in the

disengaged position to start the tractor.

2-16

OPERATION

FWD SELECTION LEVER

A. Permanent FWD

B. Auto FWD

PTO ENGAGEMENT

1. PTO Control lever

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 73 74

Comments to this Manuals

No comments

Shibaura CM374 Operator's Manual Page 28

Comments to this Manuals

Related products and manuals for Lawnmowers Shibaura CM374