Shibaura CM374 Operator's Manual download pdf (Page 47)

3-12

LIFTING SEAT

By holding the grip of the tilting seat locking

lever on the lower part at the back of the seat

and lifting it up, the lock is released and the seat

can be pull down frontward while holding the

grip.

IMPORTANT: Before operating, after lubrication

and maintenance, the hood must be closed and

locked.

TRANSMISSION, FRONT AXLE AND

HYDRAULIC SYSTEM

Checking Oil Level: Check the oil level every

50 hours.

1. With the Tractor standing level and the engine

off, check the oil level with the dipstick.

2. The oil is at the correct level when the oil level

is within the mark at the lower end of the

dipstick. If low, add ISO VG46 hydraulic oil,

through the filler hole. Do not fill beyond the

mark on the stick, as the transmission will be

overfilled.

3. Install the dipstick.

Changing Oil: Change the oil every 600

hours.

LUBRICATION AND MAINTENANCE

TILTING SEAT LOCKING LEVER

TRANSMISSION, FRONT AXLE AND HYUDRAULIC OIL

1. Filler hole A. Low Mark (TOP UP)

2. Dipstick B. Full Mark

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 73 74

No comments

Shibaura CM374 Operator's Manual Page 47