Shibaura CM374 Operator's Manual download pdf (Page 48)

3-13

LUBRICATION AND MAINTENANCE

1. With the oil at normal operating temperature

(Caution“Hot”oil!), drain and discard the oil by

removing the transmission drain plug.

Reinstall the plug after the oil has drained.

2. Check the oil and if necessary replace the

hydraulic oil filter.

3. Remove the filler plug, and fill with ISO VG46

hydraulic oil.

4. The transmission is filled to the correct level

when the oil level is within the mark at the

lower end of the dipstick. Do not fill beyond

the mark on the stick, as the transmission will

be overfilled.

5. Install the dipstick and filler plug.

IMPORTANT: The transmission, front axle and

hydraulic system operate from a common oil

sump. Special attention must be given to

keeping oil clean.

TRANSMISSION, FRONT AXLE AND HYDRAULIC

SYSTEM OIL DRAIN

1. Plug

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 73 74

No comments

Shibaura CM374 Operator's Manual Page 48